LCD Display Real
Overview LCD Display Real-time Gain 23 dBm Line Repeater Tri-band LTE1800 WCDMA2100 LTE2600 2G 3G 4G Mobile Phone Line S;
Overview
Model:GW-10DWL, 10dBmGW-15DWL, 15dBmGW-20DWL, 20dBmGW-23DWL, 23dBmGW-27DWL, 27dBmGW-30DWL, 30dBmTri-Band Signal Booster series is an ideal solution for three wireless system in small/medium businesses and home users looking to enhance indoor 2G&3G&4G wireless connectivity. It is connected via coaxial cable to Tri-Band Donor Antenna and Service Antenna, Tri-Band Donor Antenna is placed outside the building where it has easy access to BTS signal, and the Service Antenna is placed in the building where it can extend radio coverage to the blind area.Features:1. Cost effective solution for weak signal zones, reduce drop/off calls.2. Compact size, low power consumption, easy installation, great cover.Expansion and extention of the signal of base station. Optimization of the quality of the signal and source3. Cover about 500~3000m² Without block or obstruct.4. High linear design, ALC function design, low interference to BTS.5. Support any cellular devices (voice & data & video)6. Wide band signal booster, or customize selective band booster.7. Support System CDMA800, GSM, DCS, PCS, WCDMA, LTE 4G etcRecommended Accessories:1)Donor antenna: Log Periodic Antenna (9dBi, 806-960/1710-2700MHz)2)Service antenna: Omni Ceiling Antenna (3dBi, 806-960/1710-2700MHz)3)5D-FB coaxial cable with connecter (Cable length optional)Application:To expand signal coverage of fill signal blind area where signal is weak or unavailable.Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, Shop. Etc.
Recommended Accessories:
1) Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700MHz)2) Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)3) 5D-FB coaxial cable with connecter (Cable length optional)
Method of Installation:
The booster is fixed onto the wall through expansion bolts.A. Drill holes in the selected place and install expansion bolts.B. Align the holes with the expansion bolts, place flat washers, spring washers, and nuts in turn, and tighten the nuts to fasten the installing support.C. Place the booster on and fasten it.D. Connect cables and power cables to the booster respectively.E. After installing the booster as described above, power on the booster to check the operation status.
Connection:
A. BTS Port: donor antenna cable is connected with Outdoor Port;B. MS Port: service whip antenna is connected with Indoor Port;C. DC IN connected with Power adaptor.
*Click it to get the sample.
Basic Info.
Model NO. | GW-23DWL-K-LA |
Tri Band Repeater | Dcs1800+WCDMA2100+LTE2600 |
Transport Package | Neutral Packing |
Specification | CE, RoHS |
Trademark | Greetwin |
Origin | Shenzhen |
HS Code | 8543709200 |
Production Capacity | 2, 000PCS/Month |
Product Description
LCD Display Real-time Gain 23 dBm Line Repeater Tri-band LTE1800 WCDMA2100 LTE2600 2G 3G 4G Mobile Phone Line Signal BoosterModel:GW-10DWL, 10dBmGW-15DWL, 15dBmGW-20DWL, 20dBmGW-23DWL, 23dBmGW-27DWL, 27dBmGW-30DWL, 30dBmTri-Band Signal Booster series is an ideal solution for three wireless system in small/medium businesses and home users looking to enhance indoor 2G&3G&4G wireless connectivity. It is connected via coaxial cable to Tri-Band Donor Antenna and Service Antenna, Tri-Band Donor Antenna is placed outside the building where it has easy access to BTS signal, and the Service Antenna is placed in the building where it can extend radio coverage to the blind area.Features:1. Cost effective solution for weak signal zones, reduce drop/off calls.2. Compact size, low power consumption, easy installation, great cover.Expansion and extention of the signal of base station. Optimization of the quality of the signal and source3. Cover about 500~3000m² Without block or obstruct.4. High linear design, ALC function design, low interference to BTS.5. Support any cellular devices (voice & data & video)6. Wide band signal booster, or customize selective band booster.7. Support System CDMA800, GSM, DCS, PCS, WCDMA, LTE 4G etcRecommended Accessories:1)Donor antenna: Log Periodic Antenna (9dBi, 806-960/1710-2700MHz)2)Service antenna: Omni Ceiling Antenna (3dBi, 806-960/1710-2700MHz)3)5D-FB coaxial cable with connecter (Cable length optional)Application:To expand signal coverage of fill signal blind area where signal is weak or unavailable.Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, Shop. Etc.
Frequency Range | Uplink | Downlink | |||
LTE 1800MHz | 1710-1785MHz | 1805-1880MHz | |||
WCDMA 2100MHz | 1920-1980MHz | 2110-2170MHz | |||
LTE 2600MHz | 2500-2570MHz | 2620-2690MHz | |||
Max. Gain | 25dB | 30dB | |||
Max. Output Power | 0dBm | 20dBm | |||
Band width | Wide Band | ||||
Manual Gain Control | 31dB | ||||
ALC | >25dB | ||||
Ripple in Band | ≤ 8dB | ||||
Noise Figure | ≤ 6dB | ||||
VSWR | ≤ 2.0 | ||||
Intermodulation | ≤ -40dBc | ||||
Spurious Emission | 9KHz~1GHz | ≤ -36dBm | |||
1~12.75GHz | ≤ -30dBm | ||||
Time Delay | ≤ 1.5 μs | ||||
Frequency stability | ≤ 0.01ppm | ||||
MTBF | > 50000 hours | ||||
Impedance | 50 ohm | ||||
Power Supply | AC 90-264V,DC 9V/5A | ||||
Power LED | Power indicator | ||||
Alarm LED | Red | Self-oscillation or Strong input signalSmart Function, Auto Shut Down | |||
Green | Normal | ||||
Mechanical Specification | |||||
RF Connector | N-Female | ||||
Switch | Power Switch, Manual Gain Control Switch | ||||
Cooling | Heatsink Convection cooling | ||||
Humidity | < 90% | ||||
Operating Temperature | -10°C ~ +55°C | ||||
Environment Conditions | IP40 | ||||
Installation Type | Wall Installation | ||||
Size | 224*170*65mm | ||||
Weight | < 4.5Kg |
Recommended Accessories:
1) Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700MHz)2) Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)3) 5D-FB coaxial cable with connecter (Cable length optional)
Method of Installation:
The booster is fixed onto the wall through expansion bolts.A. Drill holes in the selected place and install expansion bolts.B. Align the holes with the expansion bolts, place flat washers, spring washers, and nuts in turn, and tighten the nuts to fasten the installing support.C. Place the booster on and fasten it.D. Connect cables and power cables to the booster respectively.E. After installing the booster as described above, power on the booster to check the operation status.
Connection:
A. BTS Port: donor antenna cable is connected with Outdoor Port;B. MS Port: service whip antenna is connected with Indoor Port;C. DC IN connected with Power adaptor.
FAQ
Q1.Payment Method
T/T, Western Union, Paypal, and Credit Card are available,and we suggest paying by Alibaba Trade Assurance, the most favor, and security method.*Other methods please Contact us with more details.
Q2.Delivery Date&Lead Time
Quantity | Lead time | Delivery to American/Middle East/Asia/Europe |
<50 pcs | 7 business days | 3-7 business days by DHL5-7 business days by FedEx/UPS |
100-200 pcs | 15 business days | |
>200 pcs | 24 business days |
Q3. Can I customize frequencies?
Yes, we can customize 2G/3G/4G/5G/GSM/CDMA/DCS/AWS/PCS/WCDMA/LTE,etc.
Q4. What should I do if I don't know about frequency in my country?
Please feel free to Contact us with your inquiry, we will find the frequency you need and address your problems.
Other Signal Repeater
More signal repeater please CLICK it!
Company Profile
360° Full View of Factory Evaluation
You may also like
Send inquiry
Send now